Begin Here When A Volvo Auto Start Stop Not Working!

If you just found out your Volvo auto start stop not working, it’s best to avoid taking any step in a hurry and follow a guided tutorial on basic troubleshooting. What could be causing the problem, start right there!

Usually, the main culprit for Volvo auto start-stop not working is a faulty battery, sensor issues, or software glitches in the vehicle’s system.

Keep On Reading…

Basic Troubleshooting Steps For Volvo Auto Start Stop Not Working.

Below I’ll cover instructions to inspect the battery, check temperature conditions, review system settings, avoid specific driving conditions, and monitor electrical and mechanical issues that could be affecting the Volvo’s start/stop function.

Step 1 – Inspecting Your Volvo’s Battery

One thing that a lot of owners fail to maintain is checking on the vehicles and making sure it is in good condition. This is because a low battery charge, especially after you’ve been on a lot of short trips, will eventually result in issues with the start/stop function.

Defected battery is a quite common cause behind start related issues. Something I’ve also pointed out when discussing solution for a xc90 getting start prevented try again message.

To check this, you can actually use a regular battery tester. Even a basic multimeter can help. Use your choice of tool to assess the charge level of your battery.

If you find out the battery is almost dead and that’s why the auto start-stop is failing again and again, the next step is quite simple. 

Consider visiting the service center and request for a full charge. You can also take this chance to upgrade the battery if your budget allows that.

Step 2 – Make Sure The Temperature Conditions Are Right

There’s actually an optimal temperature for the start/stop function to operate efficiently. And this ranges within (-5°C to 30°C). If by chance the temperatures have crossed the limit, you can expect it to negatively affect the system’s performance.

Also don’t forget to check the climate control settings. It should comfortably align with the recommended mark for the auto start/stop to function right.

If there’s some mismatch, you can manually adjust the settings. You should do this by matching the actual climate in the passenger compartment. 

Keep in mind that any discrepancies between set values and actual conditions will have an impact on Volvo’s overall system and performance, including the auto start-stop.

Step 3 – Go Through The System Settings

At this point, you should consider taking a close look at the vehicle’s system settings. I would suggest particularly going through the settings that are related to climate control.

You want to make sure that the settings are configured in accordance with your manual so that it allows the start/stop function to operate as intended.

Again, it’s all about making adjustments to the settings. Depending on the model, this process can vary and the answer usually lies within your user manual. 

Keep in mind that you must fully know about the system settings to adjust it. Otherwise, this can override or deactivate the start/stop function.

Step 4 – Perhaps Some Operating Conditions Are Causing The Error

There are some driving conditions that may affect the start/stop function in Volvo. The most common ones are:

• The steep road gradients.
• Issues with ABS activation.
• Sudden hard braking.

All of these situations can interfere with the system’s operation and make auto start-stop disabled. So, you should consider avoiding these conditions to not trigger the deactivation of the start/stop function. 

One area where a lot of driver mistakes is repeated starts during a short period or large steering wheel movements. Also, consider checking in the right method of operating the auto start and stop function.

Step 5 – Certain Electrical & Mechanical Issues Can Disable The Auto Start-Stop

You should also consider monitoring the electrical system to detect any issues that may impact the start/stop function.

One common cause could be high electrical current consumption. Sometimes it can happen from even a drop in battery capacity. 

Also, it’s possible a particular sensor is causing the problem, for example, the MAF sensor disrupting an xc90 to start but die right after. Such nuisance will not only temporarily limit the system’s operation but also disable the auto start-stop function for the Volvo.

Also, make sure to inspect mechanical components such as the exhaust system’s existing filter. Another component to doubt would be the starter motor. Failure or damage in these mechanical units can also affect the start/stop function.

It could also be due to a software related glitch. 

I share Crossroad’s perspective on this matter. They emphasize on ensuring vehicle’s software is up-to-date by consulting the manufacturer or authorized dealership to eliminate auto start-stop issues. software updates are great for fixing bugs, improving overall performance, and increasing system reliability.

To tactfully address any mechanical or electrical issues, it is recommended that you consult with a professional who knows how to rectify such a situation.

Wrapping Up

And that was a simple guide you can use to handle a Volvo with auto start stop not working. See, this is not an issue you can guarantee a repair in one certain way. There’s definitely a need to inspect your specific conditions and components to figure out what exactly went wrong. 

However, by following the basic steps outlined above you can initiate the troubleshooting and perhaps get it to work just fine.

But then again, it could be something more serious underneath that might need an expert to detect. As they have the right experience and tools to diagnose and fix complex issues. I would suggest not delaying that help if absolutely needed.

That’s all for today! I’ve many amazing guides under my sleeves ready to release, so make sure you stay tuned.